Woodworking cutting machine is a tool equipment. It has a certain running-in period. During the first three months of use, be careful not to cut too fast, and not to overheat the drive motor for a long time. It is necessary to frequently clean up the impurities and dust on the guide screw bearings and oil them for maintenance. Read More

With the development of my country's CNC industry technology, "machine substitution" has become a major trend in the development of manufacturing. In the field of furniture production, intelligent numerical control equipment is also causing a technological innovation. Especially in the panel furnitu Read More

Judgment and solution of common faults of CNC cutting machine1. Spindle stopReasons:(1) The circuit is short-circuited or blocked (2) The inverter displays abnormally and the inverter output is abnormal (3) The spindle is faultyJudgment method:(1) Use a multi meter to measure the continuity of the l Read More

From the point of view of the table: CNC router working table is mainly divided into aluminum table and vacuum table. The aluminum table is used as the table, and the engraving workpiece needs to be fixed manually. the vacuum adsorption table is directly placed on the table of the engraving machine, and it can be automatically fixed. Vacuum adsorption table can save time and fix more firmly. However, it is not suitable for all processing techniques. What type of woodworking engraving machine to choose depends on the processing technique. Read More

Stone engraving machine is a high-tech, fully automatic computer-controlled engraving machine that can engrave calligraphy on natural stone. Steps to correctly operate the stone engraving machine. Read More

Stone engraving machine is a high-tech, fully automatic computer-controlled engraving equipment that can engrave calligraphy and painting on natural stone, glass, and ceramics. It can meet the requirements of personalized home decoration and tooling art design, and can be used as advanced engraving processing equipment for decoration companies, handicraft industry, stone industry, inscription industry, and ceramic companies. Read More

The hot wire foam cutting machine melts the foam by heating the wire to achieve the effect of cutting the foam. What do you need to know to operate a CNC foam cutting machine? Read More

The CNC router error solutions? The wood engraving machine is widely used now,there are some machining faults that you should know.1、 When opening the software of CNC router, the computer prompts "failed to open the card, please check the card" prompt: check whether the card driver is installed, or Read More

1. The engraving machine disassembles the front and rear end covers and the front and rear nuts. 2. Push out the main shaft, rear bearing seat, linear bearing and other accessories from the front end of the shaft. 3. Front and rear bearing washers. The front and rear bearings of the motorized spind. Read More