What are the functions of the automatic edge banding machine

The automatic CNC edge banding machine is mainly used in the production of panel furniture and wooden doors. Including pre-milling, gluing, flushing, rough trimming, fine trimming, scraping, polishing, and seven-sided opening of the groove.

(1) Pre-milling: Double milling cutters are used to modify the ripple marks, burrs or non-perpendicular phenomena caused by panel sawing after cutting to achieve better edge sealing effect. It makes the bonding between the edge band and the board more closely, and the integrity and aesthetics are better.

(2) Gluing and edge-sealing: Through the special structure, the edge-sealing plate and the edge-sealing material are evenly glued on both sides to ensure stronger adhesion.

(3) Head-to-head: Through precise linear guide motion, the automatic tracking of the mold and the fast cutting structure of the high-frequency high-speed motor are used to ensure that the cut surface is flat and smooth.

(4) Rough trimming/finishing trimming: Both adopt the automatic tracking of the mold and the high-frequency high-speed motor structure to ensure the smoothness of the upper and lower parts of the trimmed plate. It is used to repair the excess edge banding material above and below the edge banding strip of the processed sheet.

(5) Scraping: It is used to eliminate the ripple marks caused by the cutting process of non-linear motion of trimming, so as to make the upper and lower parts of the plate more smooth and tidy.

Superstar CNC recommends products for you：CX-465D Wood Furniture Edge Banding Machine